Home » Ham Radio » Radio Mods » Kenwood Mic to Icom Radio Conversion
Kenwood Mic to Icom Radio Conversion [message #162] Sun, 03 February 2008 13:14
root  is currently offline root
Messages: 145
Registered: December 2004
Senior Member

Kenwood Mic to Icom Radio Conversion


To those who may desire to use a microphone with a different transceiver (other than the original microphone brand) For a Kenwood Mic to work with an Icom Radio wire the mic plug as discribed below:

Pin #1 stays on Pin #1
#2 move to Pin #5
#3 stays on Pin #3
#4 stays on Pin #4
#5 move to Pin #2
#6 move to Pin #8
#7 stays on Pin #7
#8 move to Pin #6

For Icom Mic to Kenwood Radio you must preform a special Mod on the mic

Note: ALWAYS READ THE SERVICE MANUAL ON BOTH RADIOS BEFORE TRYING THIS MODIFICATION

[Updated on: Sun, 03 February 2008 13:21]


Previous Topic:Uniden BD996 Discriminator tap
Next Topic:Kenwood Mic to Yaesu Radio Conversion
Goto Forum:
  


Current Time: Sat Sep 20 03:55:34 EDT 2014

Total time taken to generate the page: 0.01816 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 2.7.6.
Copyright ©2001-2007 FUD Forum Bulletin Board Software