Ham Radio: Radio Mods => Open Icom IC-M800 or IC-M810 to ham Frequency

Members

Help

Home

Home » Ham Radio » Radio Mods » Open Icom IC-M800 or IC-M810 to ham Frequency

Show: Today's Messages :: Show Polls :: Message Navigator

Open Icom IC-M800 or IC-M810 to ham Frequency [message #129]

Mon, 07 May 2007 20:01

root
Messages: 99
Registered: December 2004

Member

Open Icom IC-M800 or IC-M810 to ham Frequency

This modification allow the IC-M800 or IC-M810 marine band transceiver to be used in ham bands.

To make this mod you must remove power, disconnect the antenna and remove protective top and bottom cover to gain access to the RF UNIT which is on the lift side of the radio.

This mod require your cut D25 and D26 on this board. Also you must cut wire W1 on the logic unit board.

Report message to a moderator

Previous Topic:	ICOM IC-2820 Extended band, cross-band procedure
Next Topic:	IC-P7A MARS Mods

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ] [

]

Current Time: Thu Sep 9 17:38:03 EDT 2010

Total time taken to generate the page: 0.01722 seconds

.:: Contact :: Home ::.