Kenwood Mic to Icom Radio Conversion

To those who may desire to use a microphone with a different transceiver (other than the original microphone brand) For a Kenwood Mic to work with an Icom Radio wire the mic plug as discribed below:

Pin #1 stays on Pin #1
#2 move to Pin #5
#3 stays on Pin #3
#4 stays on Pin #4
#5 move to Pin #2
#6 move to Pin #8
#7 stays on Pin #7
#8 move to Pin #6

For Icom Mic to Kenwood Radio you must preform a special Mod on the mic

Note: ALWAYS READ THE SERVICE MANUAL ON BOTH RADIOS BEFORE TRYING THIS MODIFICATION

[Updated on: Sun, 03 February 2008 13:21]

Report message to a moderator

Previous Topic:	Uniden BD996 Discriminator tap
Next Topic:	Kenwood Mic to Yaesu Radio Conversion

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ] [

]

Current Time: Mon Sep 6 17:51:13 EDT 2010

Total time taken to generate the page: 0.01733 seconds

.:: Contact :: Home ::.