Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio Mods » Yaesu Mods » Yaesu VX-5R TX/RX Expand Mod (Yaesu VX-5R TX/RX Expand Mod)
Yaesu VX-5R TX/RX Expand Mod [message #3094] Tue, 31 March 2015 22:57
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member
Yaesu VX-5R TX/RX Expand Mod

Expanded range
RX 137 - 174 MHz
TX 140 - 174 MHz
TX 420 - 470 MHz

1. Remove Battery and Antenna
2. Remove the cover for Pressure Sensing Unit (SU-1). See Owner Manual
3. Remove the SU-1 Option board (if installed)
4. Locate solder pads on lower left side
5. Remove solder from the fourth pad from the left (JP5)
6. Reassemble the radio
7. Reset the microprocessor. (Press and hold [ MR ] & [ VFO] & [4 ] and turn on the radio.
Previous Topic: Yaesu FL-7000 10 Meter Transmit Mode
Goto Forum:
  


Current Time: Fri Dec 15 08:56:32 EST 2017

Total time taken to generate the page: 0.01118 seconds