Home » Ham Radio » MESH » Firewall Problems with MESH OpenWRT
Firewall Problems with MESH OpenWRT [message #3127] Thu, 12 November 2015 18:30
root  is currently offline root
Messages: 207
Registered: December 2004
Senior Member
If you want to forward WAN ports to the localnode, for some reason the OpenWRT Mesh software does not seem to work.

For permanent firewall changes:

Here is the solution to opening the port for WAN on the linksys MESH router:
1. SSH into Mesh (Don't forget to ssh with 2222)
2. Add the two lines to /etc/rc.d/S45firewall between }'s as follows:
}
iptables -A input_wan -p tcp --dport 6667 -j ACCEPT
iptables -A input_wan -p udp --dport 6667 -j ACCEPT

}

stop()

{


Reboot and firewall rules stay!



Goto Forum:
  


Current Time: Tue May 30 05:17:20 EDT 2017

Total time taken to generate the page: 0.01921 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 2.7.6.
Copyright ©2001-2007 FUD Forum Bulletin Board Software