Home » Ham Radio » Digital Modes » Kantronics 9612+ Quick Reference
Kantronics 9612+ Quick Reference [message #3216] Tue, 12 April 2016 22:36
root  is currently offline root
Messages: 207
Registered: December 2004
Senior Member
Kantronics 9612+ Quick Reference

With a computer hooked to the serial port (25 Pin Connector):

The command:
cmd:DISPLAY
will show you all of the current settings.

Depending on what radio is hooked up to which port, and what kind of data speed is needed, you need to check the PORT settings when hitting DISPLAY.

Change the port with this command if needed:
cmd:PORT 1
This changes the port to 2 (DB 9) connector. (The DB 15 is port 2)




Previous Topic:PACKRATT PK-232 Mods - Eliminate Noise
Goto Forum:
  


Current Time: Mon May 29 03:38:44 EDT 2017

Total time taken to generate the page: 0.02052 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 2.7.6.
Copyright ©2001-2007 FUD Forum Bulletin Board Software