Kenwood Mic to Yaesu Radio Conversion

To those who may desire to use a microphone with a different transceiver (other than the original microphone brand) For a Kenwood Mic to work with an Yaesu Radio wire the mic plug as discribed below:

Pin #1 move to Pin #8
#2 move to Pin #6
#3 stays on Pin #3
#4 move to Pin #1
#5 un-solder and tape
#6 un-solder and tape
#7 stays on Pin #7
#8 move to Pin #2 & #5

Note: ALWAYS READ THE SERVICE MANUAL ON BOTH RADIOS BEFORE TRYING THIS MODIFICATION

[Updated on: Sun, 03 February 2008 13:21]

Report message to a moderator

Previous Topic:	Kenwood Mic to Icom Radio Conversion
Next Topic:	Yaesu Mic to Kenwood Radio Conversion

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ] [

]

Current Time: Mon Sep 6 17:43:23 EDT 2010

Total time taken to generate the page: 0.01852 seconds

.:: Contact :: Home ::.