Ham Radio: Radio Mods => IC-7200 Band Voltage Modification

Members

Help

Home

Home » Ham Radio » Radio Mods » IC-7200 Band Voltage Modification

Show: Today's Messages :: Show Polls :: Message Navigator

IC-7200 Band Voltage Modification [message #179]

Fri, 29 August 2008 21:40

root
Messages: 99
Registered: December 2004

Member

IC-7200 Band Voltage Modification
If you want to connect an external unit which can be controlled by the band voltatge from [ACC] connector, the modifihoneyion is necessary as in pdf attached.
The band voltage appears from pin 5 of [ACC] connector after modifihoneyion (1) is completed, or the regulated 8 V appears from pin 1 of [ACC] connector after modifihoneyion (2) is completed.

Performing this mod is the customer's responsibility. Icom does not guarantee this modifihoneyion's result.

Attachment: 4147_IC-7200_Band_voltage_modification.pdf
(Size: 114.71KB, Downloaded 709 time(s))

[Updated on: Fri, 29 August 2008 21:46]

Report message to a moderator

Previous Topic:	How to expand tx/rx for TM-251A
Next Topic:	Icom IC2200H FM Discriminator Location

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ] [

]

Current Time: Thu Sep 9 17:25:04 EDT 2010

Total time taken to generate the page: 0.01794 seconds

.:: Contact :: Home ::.