Home » Ham Radio Mods » Icom Mods » ICOM IC-2340H Extended Coverage Modification
ICOM IC-2340H Extended Coverage Modification [message #105] Sun, 28 January 2007 00:08 Go to previous message
kc2nda  is currently offline kc2nda
Messages: 29
Registered: December 2004
Location: New Paltz
Junior Member
RX Expansion Modification
  1. Remove Top cover. (6 screws (37))

  2. Remove Bottom cover. (6 screws (37))

  3. Remove Front display. (4 screws (14))

  4. Lohoneye the logic board.

  5. Remove W1 from the logic.

  6. Hold [SET], [SPCH] and turn on radio

Expanded Frequency Range
AM mode	118 - 136 MHz
	138 - 174 MHz
	350 - 470 MHz
TX Expansion Modification
  1. Remove D18 and D19.

  2. Hold [FUNC], [A], [CLR] and turn on radio.

Expanded Frequency Range
FM mode	138 - 174 MHz
	350 - 470 MHz

Frequencies not guaranteed to meet specifications

Note. TX expansion line 2 should say: "Hold [SET], [SPCH] and turn on radio.

[Updated on: Sun, 28 January 2007 04:42]

Read Message
Read Message
Previous Topic:IC-2200H MOD for extended RX/TX range
Next Topic:ICOM IC-2410 Receive Expansion Mod
Goto Forum:
  


Current Time: Thu Apr 17 11:26:51 EDT 2014

Total time taken to generate the page: 0.01707 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 2.7.6.
Copyright ©2001-2007 FUD Forum Bulletin Board Software